Microsoft Windows 2000

Readme for Windows 2000
Service Pack 4 (ReadMeSP.htm)


How to Use These Notes

1.0 Introduction

1.1 List of Fixes

1.2 Key Points to Remember About Service Pack 4

1.3 Contents of the Service Pack 4 CD

1.4 Web Site Contents for Service Pack 4

1.5 Support for USB 2.0 EHCI Host Controllers

1.6 Support for Wireless Protocol 802.1x

1.7 Updates Included in Previous Windows 2000 Service Packs

2.0 Before You Install Service Pack 4

2.1 Operating Systems That Support Service Pack 4

2.2 Space Requirements for Service Pack 4

3.0 Installing Service Pack 4

3.1 Installing Service Pack 4 from the CD

3.2 Installing Service Pack 4 from the Web Site

4.0 Removing Service Pack 4

5.0 Release Notes and Known Issues

6.0 Additional Windows 2000 Resources

7.0 Copyright

How to Use These Notes

Back to Top

This Readme file provides important information about Service Pack 4 (SP4) for Microsoft® Windows® 2000 Professional, Windows 2000 Server, Windows 2000 Advanced Server, Microsoft Small Business Server 2000, and Windows 2000 with Server Appliance Kit. Read this file before you install SP4. This file explains how to install SP4, describes the issues that SP4 addresses, and provides specific information that might apply to your setup.

Links to additional resources are also included in this file. To access the Web sites referenced in this file, you must be connected to the Internet.

1.0 Introduction

Back to Top

SP4 is a collection of updates for Windows 2000. You can install SP4 either from the Service Pack 4 CD or from the Microsoft Windows 2000 Service Pack 4 Web site.

SP4 contains updates for the following areas of Windows 2000 functionality:

SP4 also includes:

1.1 List of Fixes

To determine whether to install SP4, and for detailed information about fixes that SP4 includes, see article 327194, "List of Fixes in Windows 2000 Service Pack 4," in the Microsoft Knowledge Base. This list of fixes is also available under Learn More on the Microsoft Windows 2000 Service Pack 4 Web site.

1.2 Key Points to Remember About Service Pack 4

1.3 Contents of the Service Pack 4 CD

SP4 is available from the SP4 CD, which includes:

1.4 Web Site Contents for Service Pack 4

The Microsoft Windows 2000 Service Pack 4 Web site includes all of the items listed in the preceding section, Contents of the Service Pack 4 CD. This Web site also provides links from which you can install SP4.

Either installation results in an update or an upgrade to SP4.

For more information about each of these installation options, see Installing Service Pack 4 from the Web Site later in this document.

1.5 Support for USB 2.0 EHCI Host Controllers

SP4 includes drivers for computers that contain Universal Serial Bus 2.0 Enhanced Host Controller Interface (EHCI) Peripheral Component Interconnect (PCI) controllers. You can use Device Manager to determine whether your computer has one of these controllers installed. If such a controller is installed, you can use Device Manager to update the drivers for it.

Note

We recommend that you complete the following procedure even if you have updated your Universal Serial Bus (USB) driver from the Windows Update Web site, as described in article 319973, "Universal Serial Bus 2.0 Support in Windows 2000" on the Microsoft Knowledge Base. The drivers that are provided with SP4 include additional enhancements.

To update drivers for USB 2.0

  1. After you install SP4, open Device Manager. To do so, click Start, point to Settings, click Control Panel, double-click System, click the Hardware tab, and then click Device Manager.
  2. Click Universal Serial Bus controllers.
  3. If Enhanced Host Controller appears under Universal Serial Bus controllers, you have USB 2.0 drivers installed. If Enhanced Host Controller does not appear under Universal Serial Bus Controllers, but Universal Serial Bus Controller appears under Other devices (with a yellow question mark), you do not have USB 2.0 drivers installed.
  4. Right-click Enhanced Host Controller (or Universal Serial Bus Controller under Other devices), and then click Update Driver. Follow the instructions that appear in the Hardware Update Wizard.

After you have updated the drivers, "Hi-Speed" devices that are connected to the Enhanced Host Controller will work at high speed (up to 480 Mbps).

1.6 Support for Wireless Protocol 802.1x

SP4 supports the IEEE 802.1x authentication protocol. For information about using this protocol with Windows 2000, see article 313664, "Using 802.1x Authentication on Computers Running Windows 2000" in the Microsoft Knowledge Base. This article was written for other Windows 2000 releases, but it also applies to SP4.

1.7 Updates Included in Previous Windows 2000 Service Packs

The following information applies to previous service packs for Windows 2000. If you update to SP4 from versions of Windows 2000 earlier than SP3, this information applies to your installation. For more information, see Learn More on the Windows 2000 Service Pack 3 Web site.

2.0 Before You Install Service Pack 4

Back to Top

Read these installation instructions carefully before you install SP4. Installation methods might have changed since the release of previous service packs.

Before you install SP4, see article 813432, "Release Notes for Windows 2000 Service Pack 4," in the Microsoft Knowledge Base. This article is also available under Learn More on the Windows 2000 Service Pack 4 Web site. Read these notes carefully before you install the service pack.

Note

If you want to install SP4 on multiple computers, see the Microsoft Windows 2000 Service Pack 4 Installation and Deployment Guide in the \Support\Tools folder on the Service Pack 4 CD (see SPDeploy.htm). This guide provides detailed instructions for installing SP4 as either a standalone, in which just the service pack is installed, or as an integrated installation, in which the service pack is installed along with Windows 2000.

To maximize recovery of the computer if the installation fails, use the following procedure to update your emergency repair disk before you begin the installation.

To update your emergency repair disk

  1. Click Start, point to Programs, point to Accessories, point to System Tools, and then click Backup.
  2. On the Welcome tab, click Emergency Repair Disk.
  3. Click Also backup the registry to the repair directory, and then click OK.

2.1 Operating Systems That Support Service Pack 4

You can install SP4 only on versions of Windows that are supported for the service pack. Before you install SP4, see the table in this section to determine whether your version of Windows is supported for an update to SP4.

Note

System administrators and advanced users: This information applies only to standalone installations of SP4. You can integrate SP4 with Windows 2000 installation files and make more upgrade options available. These options are explained in the Microsoft Windows 2000 Service Pack 4 Installation and Deployment Guide in the \Support\Tools folder on the Service Pack 4 CD (SPDeploy.htm).

Windows operating system Supported for installations of SP 4
Microsoft Windows 95No
Windows 98No
Windows 98 Second EditionNo
Windows NT 3.51No
Windows NT 4.0No
Windows Millennium EditionNo
Windows 2000 ProfessionalYes
Windows 2000 ServerYes
Windows 2000 Advanced ServerYes
Windows 2000 Datacenter ServerYes — update to SP4 only in conjunction with your OEM
Windows 2000 with Server Appliance KitYes
Microsoft Small Business Server 2000Yes

2.2 Space Requirements for Service Pack 4

For information about the space requirements for installing SP4, see article 813432, "Release Notes for Windows 2000 Service Pack 4," on the Microsoft Knowledge Base. This article is also available under Learn More on the Windows 2000 Service Pack 4 Web site. Read these notes carefully before you install the service pack.

3.0 Installing Service Pack 4

Back to Top

You can install SP4 from the Service Pack 4 CD, from a network drive, or from the Microsoft Windows 2000 Service Pack 4 Web site.

During the installation, backup files are created by default so that you can remove SP4 later if you want to do so. If you do not want to create backup files, you can click Do Not Archive Files in the Setup Wizard. This option is not recommended, however. If you do not have enough hard disk space to store backup files on your computer, you can move them to a shared network folder and delete them from your computer. For more information about this option, see article 290402, "HOW TO: Remove the Service Pack Restore Files and Folders in Windows," in the Microsoft Knowledge Base. Although this article was written for SP3, it applies to SP4 as well.

Important

If you choose not to create backup files, you will be unable to remove SP4.

To install SP4, you must be logged on to your computer as a member of the Administrators group.

3.1 Installing Service Pack 4 from the CD

The following procedure explains how to install SP4 from the Service Pack 4 CD. To install SP4 from the Web site instead, see the next section, 3.2 Installing Service Pack 4 from the Web Site.

To install Service Pack 4 from the CD

  1. Before you begin the installation, stop any real-time virus checkers that you have running.

    This is important because if real-time virus checkers are running, they can cause problems with the installation.

  2. Insert the Service Pack 4 CD into your CD-ROM drive. Wait a few moments for a Web page to appear.
  3. If a Web page automatically appears when you insert the CD, click the link under Install Service Pack 4.
  4. If a Web page does not automatically appear, perform the following procedure:

    1. Click Start, click Run and then type the following:

      Drive:/w2ksp4.exe

      (Drive represents the drive letter associated with your CD-ROM drive)

    2. Press ENTER.
  5. If Setup prompts you to run W2ksp4.exe or to save it to disk, click Run this program from its current location, and then click OK.
  6. Follow the instructions that appear in the Windows 2000 Service Pack 4 Setup Wizard.
  7. If you do not want to create backup files, select the Do Not Archive Files option when the Setup Wizard displays it.
  8. Important

    If you select Do Not Archive Files, you will not be able to remove SP4 later. We recommend that you create backup files.

  9. Restart your computer, and then restart the virus checkers.

3.2 Installing Service Pack 4 from the Web Site

You have two installation options for installing SP4 from the Web:

For more information about these options, and for the download links, see the Microsoft Windows 2000 Service Pack 4 Web site.

Important

Windows 2000 includes Internet Explorer 5.01. If you use a browser other than Internet Explorer 5.01 or later, your connection settings might prevent you from being able to use the Express installation option to install SP4. As an alternative, you can complete the Network installation, which is explained in To download the installation files in the next section.

To run the Express installation

  1. Before you begin the installation, stop any real-time virus checkers that you have running.

    This is important because if real-time virus checkers are running, they can cause problems with the installation.

  2. Go to the Microsoft Windows 2000 Service Pack 4 Web site.
  3. Click Get SP4 Now, and then click Download Windows 2000 SP4.
  4. Choose a language from the drop-down list and click Go.
  5. Important information appears about the two installations that are available. Before you proceed, review this information to ensure the appropriateness of this installation.
  6. Click SP4 Express Installation.
  7. The File Download dialog box appears.
  8. To download files and install SP4 now, click Open, and then click OK.
  9. If a security warning appears asking whether you want to install "Web Package," click Yes to continue downloading SP4.
  10. Follow the instructions in the Windows 2000 Service Pack 4 Setup Wizard. If you do not want to create backup files, select the Do Not Archive Files option when the Setup Wizard displays it.
  11. Important

    If you select Do Not Archive Files, you will not be able to remove SP4 later. We recommend that you create backup files.

  12. The Express installation detects the files that need to be updated and installs them.
  13. Important

    During the download, make sure that you are downloading files from a Microsoft Web site.

  14. The Setup Wizard displays installation progress and tells you when the installation is complete.
  15. When the installation is complete, restart your computer, and then restart the virus checkers.

To run the Network installation

If you plan to perform a Network installation of SP4, you should read the following procedure carefully and completely before you extract and install SP4.

The files that are downloaded for SP4 include all files that have been updated for this service pack, not just the files required for the current computer. Because of the substantial amount of time it takes to download the installation files for SP4, you might want to save W2ksp4.exe on your computer. Doing so prevents you from having to repeat this lengthy download process if you must restart the installation or reinstall SP4. Because of the size of the download, if your computer has more than one hard disk, it is best to save W2ksp4.exe to a disk other than your system disk.

To download the installation files

  1. Go to the Microsoft Windows 2000 Service Pack 4 Web site.
  2. Click Get SP4 Now, and then click Download Windows 2000 SP4.
  3. Choose a language from the drop-down list, and then click Go.
  4. Important information appears about the two installations that are available. Before you proceed, review this information to ensure the appropriateness of this installation.
  5. To install SP4, click SP4 Network Installation.
  6. The File Download dialog box appears. We recommend that you select the option Save this program to disk. This minimizes the time required to download files. You can choose a location to save the file.

The files that are downloaded for SP4 include all files that have been updated for this service pack, not just the files required for the current computer.

During the download, the compressed executable file W2ksp4.exe is saved on your hard disk.

Important

During the download, make sure that you are downloading files from a Microsoft Web site.

To install Service Pack 4

  1. Before you begin the installation, stop any real-time virus checkers that you have running.

    This is important because if real-time virus checkers are running, they can cause problems with the installation.

  2. Click Start, and then click Run.
  3. Do one of the following:
  4. Follow the instructions in the Windows 2000 Service Pack 4 Setup Wizard.

For more information, see the preceding sections of this document.

To extract the files without starting the installation (advanced users)

You can use the /X command-line option to extract the files without installing them. For details about this, see the Microsoft Windows 2000 Service Pack 4 Installation and Deployment Guide in the \Support\Tools folder on the Service Pack 4 CD (see SPDeploy.htm).

4.0 Removing Service Pack 4

Back to Top

If you chose to create backup files when you installed SP4, you can remove SP4 at any time and restore your computer to its previous state. See 3.1 Installing Service Pack 4 for information about the backup option.

To remove Service Pack 4 by using Add/Remove Programs

  1. Click Start, point to Settings, and then click Control Panel.
  2. Double-click Add/Remove Programs, click Windows 2000 Service Pack 4, and then click Change/Remove.
  3. Follow the instructions that appear.
  4. When you have completed this process, click OK to restart the computer.

Important

If you choose to remove SP4, a dialog box displays a list of the applications that you have installed since you updated Windows 2000 to SP4. If you continue to remove SP4, these applications might not work correctly.

Multiple descriptions for some applications might appear instead of a single generic description. You should ignore these additional descriptions.

5.0 Release Notes and Known Issues

Back to Top

For release notes and information about known issues, see article 813432, "Release Notes for Windows 2000 Service Pack 4," in the Microsoft Knowledge Base. This article is also available under Learn More on the Windows 2000 Service Pack 4 Web site. Read these notes carefully before you install the service pack.

6.0 Additional Windows 2000 Resources

Back to Top

For additional information about Windows 2000 and SP4, see the following resources:

7.0 Copyright

Back to Top

Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless otherwise noted, the example companies, organizations, products, domain names, e-mail addresses, logos, people, places and events depicted herein are fictitious, and no association with any real company, organization, product, domain name, e-mail address, logo, person, place or event is intended or should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation.

Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property.

© 2003 Microsoft Corporation. All rights reserved.

Microsoft, MS-DOS, Windows, Windows NT, and Outlook are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

This product contains graphics filter software; this software is based in part on the work of the Independent JPEG Group.

The names of actual companies and products mentioned herein may be the trademarks of their respective owners.